1. Pull access panel out at the top front of passenger side foot well. ("See Photo Below")

2. After accessing compartment loosen lower mounting screw and attach ground wires.(2 Black W/ Single Connector."See Photo Below")

3. Remove NPP Fuse. (Lower right hand corner of Fuse Panel)

4. Plug in Red and White wires where the fuse was removed.

    Red closest to the kick panel. ("See Photo Below")

There is plenty of room to put the unit in the lower left hand corner of the compartment.The single Blue wire is the antenna for the unit,I usually just stretch it out up the left side and tape it to the wireing harness above it.

5. Test and Replace Carpeted Floor Access panel.

6. Your Ready to Rumble!!

CLICK HERE!!